We are in social networks

заказать / приобрести

Заказать бесплатный тестер

Заказать бесплатный тепло тех расчет

1мм броня = 50мм мин ваты

Bronya Antirust

Liquid thermal insulation BRONYA ANTIRUST
Directly onto rust!
 
Липецк. БекартLiquid thermal insulation Bronya Antirust This is the first and unique material developed in Russia which can be applied directly onto the rusted surface. It is enough to just remove loose rust with a wire brush and right after that thermal insulation Bronya Anrirust can be applied following its application guide. Extra-fine thermal insulation Bronya Antirust is a special compound with improved adhesion and rust-preventing characteristics. It is resistant to UV light and chemicals (salt solutions, acids, alkali, some types of oil products). The coat increases the service life of isolated surfaces and protects against corrosion. 
Extra-fine liquid insulation Bronya Antirust is used for thermal insulation of construction steel structures, metalware, pipelines, various industrial equipment exposed to high humidity or hostile environment. Operating temperature is from -60°С to +150°С. 
Тюмень. Котельная хирургического центра.When Bronya Antirust is used for thermal insulation of in-service structures and pipelines, it significantly decreases labor costs as it does not require special preparation of the working surface.  
For cost reasons, Bronya Antirust can be applied as a first layer and classic thermal insulation Bronya for further layers. 
Application of Bronya Antirust helps to:
  • decrease or completely eliminate condensed water formation on cold water pipelines and air ducts; isolate equipment without process shutdown;
  • cut repair costs in case of emergencies by reducing time spent for leak search and old isolation removal; prevent metal surfaces from thermal distortion.
  • this coat is a base for application of other modifications.
OAO Липецкийхладокомбинат центра For instance, rated thickness of the extra-fine thermal insulation applied onto a ferrous metal tank is 2.5mm. At least 6 layers (1 layer of primer and 5 layers of 0.5mm coat with interlayer drying of 24 hours) need to be applied if using competitors' materials (mainly US and Canada) as well as our basic modification Bronya Classic.  Our solution requires only three layers:
1st layer - 0.5mm of Bronya Antirust (this is not only corrosion lock but also modifier, adhesion promoting agent and hydroisolator (due to a high rate of film formation).
2nd layer after 24 hours - 1mm of Bronya Facade
3rd layer after 24 hours - 1mm of Bronya Facade 
Order a free sample and you will see that claimed specifications are true! 
You can fine Bronya Classic guideline in  Technical Documentation section.

Extra-fine thermal insulation Bronya Antirust is delivered in the following packages:

Bronya Antirust 5L 
Теплоизоляция Броня Антикор 5л
Bronya Antirust 10L 
Теплоизоляция Броня Антикор 10л
Bronya Antirust 20L 
antikor_20.png


Table of Bronya Antirust specifications
FactorUnitValue
Coat formSmooth, uniform, mat gray (beige) color film
Coat resistance to temperature drop from -40°С to +60°С
Coat form 
no changes
Service life for concrete and metal surfaces in boreal climate (Moscow)
yearsnot less than 15
Material thermal conductivity factor 
W/m°С0,0012
Material vapor conductivity factor 
mg/m h Pa0,003
Surface temperature during material application°Сот +7 до +150
Service temperature 
°Сот -60 до +150
Material density at 20°С, kg/m3kg/m3600±10%
Volatile matter content, max%43
Hydrogen ion exponentрН7,5-11,0
Drying time and film formation at 20±2°С, minh24
Coat adhesion with respect to the peeling-off force, min
  • to concrete and brick surface
  • to steel 
MPa
1,3
2,2
Coat resistance to static impact at 20±2° С, min
  • Water
  • 5% NaOH solution
Coat form
no changes
no changes

Authorization

Not register?

Contacts

8-800-550-34-34

+7 (8442) 50 62 30

Address: Russian Federation, Volgograd, Batalionnaya St., 13A

Ask your question using the feedback form


Feedback Form
CAPTCHA
User registration

Or:

Subscribe to newsletter